This product is currently out of stock. You can still place an order for the item, we will immediatly source the item and dispatch it as soon as we receive it.

The IXIO-DT3 is a sensor which combines radar technology for the activation of the door and infrared technology for the user protection along with external monitoring for emergency exits.
The unidirectional radar enables energy savings to be made.
The three-dimensional infrared curtain protects people from any contact with the doors.
Thanks to the LCD screen and the BEA DECODER app sensor configuration has never been easier

Note: This sensor is also a Direct replacment for the FAAC XDT3 sensor.

Features

Intuitive configuration thanks to an LCD screen and/or a BEA remote control.
LCD graphics screen with choice of language.
10 adjustment options for the IR curtains.
Lateral orientation from -15° to +15° for the radar antenna.
4 infrared spotlights visible on the ground for the easy adjustment of the failsafe curtain.
Plug, push & go.
The ZIP code is a compression of all sensor settings in encoded format (which can be decoded by the BEA DECODER app).

Specifications

Supply voltage:	12 V - 24 V AC +/-10% ; 12 V - 30 V DC +/-10% (to be operated from SELV compatible power supplies only)
Power consumption:	< 2.5 W
Mounting height:	2 m to 3.5 m (local regulations may have an impact on the acceptable mounting height)
Temperature range:	-25°C to +55°C; 0-95% relative humidity, non condensing
Degree of protection:	IP54
Noise:	< 70 dB
Expected lifetime:	20 years
	Motion	Presence
Detection mode:	Min. detection speed: 5 cm/s	Typical response time: < 200 ms (max. 500 ms)
Technology:	Microwave doppler radar Transmitter frequency: 24.150 GHz Transmitter radiated power: < 20 dBm EIRP Transmitter power density: < 5 mW/cm2	Active infrared with background analysis Spot: 5 cm x 5 cm (typ) Number of spots: max. 24 per curtain Number of curtains: 2
Output:	Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC In switching mode: NO/NC In frequency mode: pulsed signal (f= 100 Hz +/- 10%) Galvanically isolated current source No detection: current source ON Open circuit voltage: 6.5 V Output voltage available at 10 mA: 3 V min. Typical load: up to 3 optocouplers in series Detection: current source OFF Open-circuit remained voltage: < 500 mV	Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC Holdtime: 0.3 to 1 s
Test input:		Sensitivity: Low: < 1 V; High: > 10 V (max. 30 V) Response time on test request: typical: < 5 ms
Norm conformity:	EN 12978, EN ISO 13849-1:2008 PL «d» CAT. 2; EN 16005:2012 Chapter 4.6.8; DIN 18650-1:2010 Chapter 5.7.4; AutSchR; BS 7036-1:1996 Chapter 7.3.2 (only applicable for relay output in frequency mode and current source output)	EN 12978, EN ISO 13849-1:2008 PL «d» CAT. 2 (under the condition that the door control system monitors the sensor at least once per door cycle); IEC 61496-1:2012 ESPE Type 2; EN 16005:2012 Chapter 4.6.8; DIN 18650-1:2010 Chapter 5.7.4; AutSchR; BS 7036-1:1996 Chapter 7.3.2