The IXIO-DT3 is a sensor which combines radar technology for the activation of the door and infrared technology for the user protection along with external monitoring for emergency exits. 
The unidirectional radar enables energy savings to be made.
The three-dimensional infrared curtain protects people from any contact with the doors.
Thanks to the LCD screen and the BEA DECODER app sensor configuration has never been easier

Note: This sensor is also a Direct replacment for the FAAC XDT3 sensor.

Features

  • Intuitive configuration thanks to an LCD screen and/or a BEA remote control.
  • LCD graphics screen with choice of language.
  • 10 adjustment options for the IR curtains.
  • Lateral orientation from -15° to +15° for the radar antenna.
  • 4 infrared spotlights visible on the ground for the easy adjustment of the failsafe curtain.
  • Plug, push & go.
  • The ZIP code is a compression of all sensor settings in encoded format (which can be decoded by the BEA DECODER app).

 

Specifications

Supply voltage:

12 V - 24 V AC +/-10% ; 12 V - 30 V DC +/-10% (to be operated from SELV compatible power supplies only)

Power consumption:

< 2.5 W

Mounting height:

2 m to 3.5 m (local regulations may have an impact on the acceptable mounting height)

Temperature range:

-25°C to +55°C; 0-95% relative humidity, non condensing

Degree of protection:

IP54

Noise:

< 70 dB

Expected lifetime:

20 years

  Motion Presence

Detection mode:


Min. detection speed: 5 cm/s


Typical response time: < 200 ms (max. 500 ms)

Technology:

Microwave doppler radar
Transmitter frequency: 24.150 GHz
Transmitter radiated power: < 20 dBm EIRP Transmitter power density: < 5 mW/cm2

Active infrared with background analysis
Spot: 5 cm x 5 cm (typ)
Number of spots: max. 24 per curtain
Number of curtains: 2

Output:

Solid-state-relay (potential and polarity free)
Max. contact current: 100 mA
Max. contact voltage: 42 V AC/DC
In switching mode: NO/NC
In frequency mode: pulsed signal
(f= 100 Hz +/- 10%)
Galvanically isolated current source
No detection: current source ON
Open circuit voltage: 6.5 V
Output voltage available at 10 mA: 3 V min.
Typical load: up to 3 optocouplers in series
Detection: current source OFF
Open-circuit remained voltage: < 500 mV
Solid-state-relay (potential and polarity free) Max. contact current: 100 mA Max. contact voltage: 42 V AC/DC Holdtime: 0.3 to 1 s

Test input:

 

Sensitivity: Low: < 1 V; High: > 10 V (max. 30 V) Response time on test request: typical: < 5 ms

Norm conformity:

EN 12978, EN ISO 13849-1:2008 PL «d» CAT. 2; EN 16005:2012 Chapter 4.6.8; DIN 18650-1:2010 Chapter 5.7.4; AutSchR; BS 7036-1:1996 Chapter 7.3.2 (only applicable for relay output in frequency mode and current source output)

EN 12978, EN ISO 13849-1:2008 PL «d» CAT. 2 (under the condition that the door control system monitors the sensor at least once per door cycle); IEC 61496-1:2012 ESPE Type 2; EN 16005:2012 Chapter 4.6.8; DIN 18650-1:2010 Chapter 5.7.4; AutSchR; BS 7036-1:1996 Chapter 7.3.2

 

Videos

BEA EAGLE One

BEA EAGLE One

£121.00 Inc VAT £145.20

BEA 4SAFE On Door Safety Sensor

BEA 4SAFE On Door Safety Sensor

£150.00 Inc VAT £180.00

BEA 4SAFE Fog-Proof  Lens Cover

BEA 4SAFE Fog-Proof Lens Cover

£22.40 Inc VAT £26.88

BEA 4SAFE End Caps

BEA 4SAFE End Caps

£11.30 Inc VAT £13.56

BEA IXIO-DT1 Activation & Safety sensor

BEA IXIO-DT1 Activation & Safety sensor

£148.00 Inc VAT £177.60

BEA IXIO & VIO Ceiling Bracket

BEA IXIO & VIO Ceiling Bracket

£18.00 Inc VAT £21.60

Write a review

Please login or register to review

BEA IXIO-DT3 Activation & Safety sensor

  • Brand: BEA
  • Product Code: BEA-IXIO-DT3
  • Availability: In Stock
  • £198.00

  • Inc VAT £237.60

Related Products

Tags: bea ixio-dt3 activation safety sensor, bea-ixio-dt3, bea, activation safety devices

Recently Viewed